CWE-358

A vulnerability in the container management subsystem of Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and gain elevated privileges. This vulnerability is due to an insecure default configuration of the Kubernetes container management subsystem within DNA Center. An attacker who has the ability to access the Kubernetes service port could execute commands with elevated privileges within provisioned containers. A successful exploit could result in a complete compromise of affected containers. This vulnerability affects Cisco DNA Center Software Releases 1.1.3 and prior. Cisco Bug IDs: CSCvi47253.

The ITarian platform (SAAS / on-premise) offers the possibility to run code on agents via a function called procedures. It is possible to require a mandatory approval process. Due to a vulnerability in the approval process, present in any version prior to 6.35.37347.20040, a malicious actor (with a valid session token) can create a procedure, bypass approval, and execute the procedure. This results in the ability for any user with a valid session token to perform arbitrary code execution and full system take-over on all agents.

A logic error in OAuthRequestFilter rejects legitimate requests originating from the bound IP address, while blindly allowing requests from any other IP address. Enabling this security feature inadvertently creates an inverse security check. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue.

Whale Browser before 4.33.325.17 allows an attacker to escape the iframe sandbox in a dual-tab environment.

User authentication with username and password credentials is ineffective in OpenText (Micro Focus) Visual COBOL, COBOL Server, Enterprise Developer, and Enterprise Server (including product variants such as Enterprise Test Server), versions 7.0 patch updates 19 and 20, 8.0 patch updates 8 and 9, and 9.0 patch update 1, when LDAP-based authentication is used with certain configurations. When the vulnerability is active, authentication succeeds with any valid username, regardless of whether the password is correct; it may also succeed with an invalid username (and any password). This allows an attacker with access to the product to impersonate any user. Mitigations: The issue is corrected in the upcoming patch update for each affected product. Product overlays and workaround instructions are available through OpenText Support. The vulnerable configurations are believed to be uncommon. Administrators can test for the vulnerability in their installations by attempting to sign on to a Visual COBOL or Enterprise Server component such as ESCWA using a valid username and incorrect password.

A non-feature complete authentication mechanism exists in the production application allowing an attacker to bypass all authentication checks if LDAP authentication is selected.An unauthenticated attacker can leverage this vulnerability to log in to the CypberPower PowerPanel Enterprise as an administrator by selecting LDAP authentication from a hidden HTML combo box. Successful exploitation of this vulnerability also requires the attacker to know at least one username on the device, but any password will authenticate successfully.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Samsung Galaxy S9 prior to 1.4.20.2. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the GameServiceReceiver update mechanism. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-7477.

Spring Framework, versions 5.0 prior to 5.0.5 and versions 4.3 prior to 4.3.16 and older unsupported versions, allow applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a remote code execution attack. This CVE addresses the partial fix for CVE-2018-1270 in the 4.3.x branch of the Spring Framework.

Spring Framework, versions 5.0 prior to 5.0.5 and versions 4.3 prior to 4.3.15 and older unsupported versions, allow applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a remote code execution attack.

udp.c in the Linux kernel before 4.5 allows remote attackers to execute arbitrary code via UDP traffic that triggers an unsafe second checksum calculation during execution of a recv system call with the MSG_PEEK flag.

Backpropagate is a Python library for fine-tuning large language models on a single GPU. In versions 1.1.0 and 1.1.1, the optional Reflex web UI exposes a training control plane without authentication: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push. The CLI accepts two operator-facing flags intended as security controls: --auth user:pass — documented as "require HTTP Basic authentication on every request to the UI." and--share — documented as "expose the UI on a public address; requires --auth." When --auth user:pass is passed, the CLI prints Auth: enabled (user: <username>) to confirm to the operator that authentication is active, then exports BACKPROPAGATE_UI_AUTH=user:pass to the subprocess that launches the Reflex backend. The Reflex backend (backpropagate/ui_app/**) never reads BACKPROPAGATE_UI_AUTH. No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port — local or remote, depending on whether --share is used — has full UI access. An inline comment at backpropagate/cli.py:1217-1218 in the v1.1.0 source documents the gap: "For Phase 1 the variable is exported but Reflex doesn't read it yet." This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced. An attacker who reaches the bound port can read uploaded datasets, trigger arbitrary training runs against any local base models as well as read their paths, trigger HuggingFace Hub pushes and cause disk-fill DoS. This issue has been fixed in version 1.2.0. If developers cannot immediately upgrade to 1.2.0 run backprop ui with no flags so it binds to localhost, use SSH port-forwarding (ssh -L 7860:localhost:7860 <training-host>) instead of --share for remote access, and audit any host previously launched with --share, re-issuing any HF tokens used during those sessions.

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. A Critical Remote Code Execution (RCE) vulnerability exists in SuiteCRM 7.15.0 and 8.9.2, allowing authenticated administrators to execute arbitrary system commands. This vulnerability is a direct Patch Bypass of CVE-2024-49774. Although the vendor attempted to fix the issue in version 7.14.5, the underlying flaw in ModuleScanner.php regarding PHP token parsing remains. The scanner incorrectly resets its internal state ($checkFunction flag) when encountering any single-character token (such as =, ., or ;). This allows attackers to hide dangerous function calls (e.g., system(), exec()) using variable assignments or string concatenation, completely evading the MLP security controls. Versions 7.15.1 and 8.9.3 patch the issue.

Whale browser before 4.35.351.12 allows an attacker to escape the iframe sandbox in a sidebar environment.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Diffusers is the a library for pretrained diffusion models. Prior to 0.38.0, a trust_remote_code bypass in DiffusionPipeline.from_pretrained allows arbitrary remote code execution despite the user passing trust_remote_code=False (or omitting it, which is the default). The vulnerability has three variants, all sharing the same root cause — the trust_remote_code gate was implemented inside DiffusionPipeline.download() rather than at the actual dynamic-module load site, so any code path that bypassed or short-circuited download() also bypassed the security check. DiffusionPipeline.from_pretrained('repoA', custom_pipeline='attacker/repoB', trust_remote_code=False) — the gate evaluated against repoA's file list rather than repoB's, so repoB's pipeline.py was loaded and executed. DiffusionPipeline.from_pretrained('/local/snapshot', custom_pipeline='attacker/repoB', trust_remote_code=False) — the local-path branch never invoked download(), so the gate was never reached and remote code from repoB executed. DiffusionPipeline.from_pretrained('/local/snapshot', trust_remote_code=False) where the snapshot contains custom component files (e.g. unet/my_unet_model.py) referenced from model_index.json — same root cause; the local path skipped download() and custom component code executed. This vulnerability is fixed in 0.38.0.

A vulnerability has been found in FAST/TOOLS provided by Yokogawa Electric Corporation. This product lacks HSTS (HTTP Strict Transport Security) configuration. When an attacker performs a Man in the middle (MITM) attack, communications with the web server could be sniffed. The affected products and versions are as follows: FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to R10.04

A flaw was found in Keycloak. A vulnerability exists in the jwt-authorization-grant flow where the server fails to verify if an Identity Provider (IdP) is enabled before issuing tokens. The issuer lookup mechanism (lookupIdentityProviderFromIssuer) retrieves the IdP configuration but does not filter for isEnabled=false. If an administrator disables an IdP (e.g., due to a compromise or offboarding), an entity possessing that IdP's signing key can still generate valid JWT assertions that Keycloak accepts, resulting in the issuance of valid access tokens.

Inappropriate implementation in Extensions in Google Chrome prior to 135.0.7049.52 allowed a remote attacker to perform privilege escalation via a crafted HTML page. (Chromium security severity: Medium)

Inappropriate implementation in V8 in Google Chrome prior to 128.0.6613.84 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Inappropriate implementation in V8 in Google Chrome prior to 126.0.6478.182 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)