CWE-911
Improper Update of Reference Count
The product uses a reference count to manage a resource, but it does not update or incorrectly updates the reference count.
Reference counts can be used when tracking how many objects contain a reference to a particular resource, such as in memory management or garbage collection. When the reference count reaches zero, the resource can be de-allocated or reused because there are no more objects that use it. If the reference count accidentally reaches zero, then the resource might be released too soon, even though it is still in use. If all objects no longer use the resource, but the reference count is not zero, then the resource might not ever be released.
Concurrent removals of certain anonymous shared memory mappings by using the UMTX_SHM_DESTROY sub-request of UMTX_OP_SHM can lead to decreasing the reference count of the object representing the mapping too many times, causing it to be freed too early. A malicious code exercizing the UMTX_SHM_DESTROY sub-request in parallel can panic the kernel or enable further Use-After-Free attacks, potentially including code execution or Capsicum sandbox escape.
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Drop the translation cache reference only for the erased entry vgic_its_invalidate_cache() walks the per-ITS translation cache with xa_for_each() and drops the cache's reference on each entry with vgic_put_irq(). It puts the iterated pointer, though, rather than the value returned by xa_erase(). The function is called from contexts that do not exclude one another: the ITS command handlers hold its_lock, the GITS_CTLR write path holds cmd_lock, and the path that clears EnableLPIs in a redistributor's GICR_CTLR holds neither. Two or more of them can drain the same cache concurrently, and if each one observes the same entry, erases it and then puts it, the single reference the cache holds on that entry is dropped more than once. The entry can then be freed while an ITE still maps it. xa_erase() is atomic and returns the previous entry, so put only the entry that this context actually removed. The cache reference is then dropped exactly once per entry even when the invalidations run concurrently, and the behavior is unchanged when only one context runs.
In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst.
In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().
Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions.
The reference count changes made as part of the CVE-2023-33951 and CVE-2023-33952 fixes exposed a use-after-free flaw in the way memory objects were handled when they were being used to store a surface. When running inside a VMware guest with 3D acceleration enabled, a local, unprivileged user could potentially use this flaw to escalate their privileges.
Improper Update of Reference Count vulnerability in net/sched of Linux Kernel allows local attacker to cause privilege escalation to root. This issue affects: Linux Kernel versions prior to 5.18; version 4.14 and later versions.
This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Unified Automation OPC UA C++ Demo Server 1.7.6-537. Authentication is not required to exploit this vulnerability. The specific flaw exists within the OpcUa_SecureListener_ProcessSessionCallRequest method. A crafted OPC UA message can force the server to incorrectly update a reference count. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-16927.
An Improper Handling of Unexpected Data Type vulnerability in the handling of SIP calls in Juniper Networks Junos OS on SRX Series and MX Series platforms allows an attacker to cause a memory leak leading to Denial of Services (DoS). This issue occurs on all MX Series platforms with MS-MPC or MS-MIC card and all SRX Series platforms where SIP ALG is enabled. Successful exploitation of this vulnerability prevents additional SIP calls and applications from succeeding. The SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. To confirm whether SIP ALG is enabled on SRX use the following command: user@host> show security alg status | match sip SIP : Enabled This issue affects Juniper Networks Junos OS on SRX Series and on MX Series: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S8, 19.4R3-S10; 20.1 versions 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2-S2, 21.4R3; 22.1 versions prior to 22.1R1-S2, 22.1R2, 22.1R3-S1. This issue does not affect Juniper Networks Junos OS on SRX Series and on MX Series: All versions prior to 18.2R1.
An Improper Update of Reference Count vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to trigger a counter overflow, eventually causing a Denial of Service (DoS). This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S1-EVO; 21.1 versions prior to 21.1R3-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS.
In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the refcount of the "smmu" even though the return value is less than 0. The reference counting issue happens in some error handling paths of arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get() fails, the caller functions forget to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by calling pm_runtime_resume_and_get() instead of pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount balanced in case of failure.
NLnet Labs Unbound up to and including version 1.25.0 has a vulnerability in the jostle logic that could defeat its purpose and degrade resolution performance. Retransmits of the same query could renew the age of slow running queries and not allow the jostle logic to see them as aged and potential targets for replacement with new queries. An adversary who can query a vulnerable Unbound and who can control a domain name server that replies slowly and/or maliciously to Unbound's queries can exploit the vulnerability and degrade the resolution performance of Unbound. When Unbound's 'num-queries-per-thread' reaches its limit, the jostle logic kicks in. When a new query comes in, half of the available queries that are also slow to resolve are candidates for replacement. The vulnerability then happens because duplicate queries that need resolution would skew the aging result by using the timestamp of the latest duplicate query instead of the original one that started the resolution effort. Cache and local data response performance remains unaffected. Coordinated attacks could raise this to a denial of resolution service. Unbound 1.25.1 contains a patch with a fix to attach an initial, non-updatable start time for incoming queries that allow the jostle logic to work as intended.
An issue was discovered in the Linux Kernel from 4.18 to 4.19, an improper update of sock reference in TCP pacing can lead to memory/netns leak, which can be used by remote clients.
A flaw was found in grub2. When failing to mount an HFS+ grub, the hfsplus filesystem driver doesn't properly set an ERRNO value. This issue may lead to a NULL pointer access.
A flaw was found in the Linux kernel's netdevsim device driver, within the scheduling of events. This issue results from the improper management of a reference count. This may allow an attacker to create a denial of service condition on the system.
It was discovered that aufs improperly managed inode reference counts in the vfsub_dentry_open() method. A local attacker could use this vulnerability to cause a denial of service attack.